Danger refinishing bathtub

[samfloor]

by Nancy Shute
We've all seen those bathtub refinishing ads that promise a glossy new surface on the dingy old tub.
But a solvent used to make that transformation has killed at least 13 people who used it to strip bathtubs from 2006 to 2011, according to a new study. The chemical, methylene chloride, is sold as a solvent and paint stripper both to professionals and in dozens of do-it-yourself products sold at home improvement stores.
"I just went to my local hardware store and saw the same product," says Ken Rosenman. He's chief of the division of occupational and environmental medicine at Michigan State University and an author on the study, which was published in Morbidity and Mortality Weekly Report.
"The actual product said do not use in a bathroom," Rosenman says. That's because the fumes are very toxic, and it's impossible to ventilate a bathroom well enough to safely use it. That's what killed the 13 people. But that warning comes in very small print, he notes."I think there's a general concept, 'Hey, if I can buy this in my regular hardware store, I can use this.'"
All 13 people who died were working as professional bathtub refinishers, using methylene chloride to remove old paint before resurfacing a tub with polyurethane paint. Bathtub refinishing has become a popular home remodeling option, because it costs a few hundred dollars compared to the thousands required to remove and replace an aged tub.
A Michigan man who died in 2010 while stripping a tub had used about 6 ounces of a stripper that contained 60 percent to 100 percent methylene chloride. His exposure to fumes as calculated by the Michigan State researchers was 637 to 1,062 parts per million in the bathroom, and 11,618 to 19,364 parts per million in the tub.
That's way over the Occupational Safety and Health Administration's short-term exposure limit of 125 parts per million, or the National Institute for Occupational Safety and Health's dangerous to live and health level of 2,300 ppm.
Alternatives to methylene chloride as a paint stripper include acetate, mineral spirits and caustic pastes, Rosenman says, but they don't work as quickly.
The deaths highlight a problem with all the cans and bottles in the hardware store, Rosenman says: There are very few requirements for testing and labeling of chemicals sold for the do-it-yourself market.
He discovered the deaths while researching workplace-related accidents for NIOSH. Worker exposure to toxic chemicals is regulated, he notes, but do-it-yourselfers don't get the same protections.
"If you look at your typical whatever in the hardware store, there's no labeling requirement."
So DIY carefully.

[HiHood]

that's why I'll toss the tub out and put a shower in.

[Sideways]

I would trust an article published in the MMWR. It's put out by the CDC and is one of the primary resource tools for industrial/ occupational health and infection control practitioners.